Got an annoying scratch or stone chip on your premium KYMCO maxi-scooter? Skip the expensive body shop bills. Our Genuine KYMCO Touch-Up Paint Pens are formulated using exact OEM color codes to ensure a seamless, professional-grade blend. Designed specifically for high-end models like the AK550, CV3, and KRV, this is the ultimate DIY solution to wipe out blemishes and protect your bike from the elements.
Why Genuine KYMCO Factory-Match Paint?
100% OEM Color Match: Formulated directly from KYMCO’s official color charts (e.g., WB419PA, BG075FA) for zero visible difference.
Weatherproof Protection: Premium automotive-grade paint that seals out moisture to prevent rust and shell degradation.
Quick-Drying Formula: Dries fast and clean, allowing you to get back on the road in no time.
BEFORE YOU BUY: HOW TO FIND YOUR CODE
To ensure a perfect match, please check the official silver factory sticker inside your under-seat compartment (luggage box) to verify your bike's color code, or refer to our verified compatibility list below.
IMPORTANT NOTE ON COLOR MATCHING & AGING
Please note that vehicles exposed to sunlight, weather, and UV rays over time will experience natural paint fading. Since our touch-up pens contain fresh, factory-standard paint, a slight variance between your bike's weathered paint and the new touch-up coat may occur on older or frequently outdoor-parked scooters.
Pro Tips to Minimize Color Differences & Achieve a Flawless Finish:
Test Before Applying: Always shake the pen thoroughly for 30 seconds and test the paint on a hidden area (like underneath the fairing) to check the color match and opacity before working on the actual scratch.
Prep is Key: Thoroughly clean the scratched area with rubbing alcohol to remove all old wax, dirt, and grease. The new paint needs a clean surface to bond properly and match the true shade.
Layer Thinly: Do not apply a thick blob at once. Apply in ultra-thin layers, allowing 10–15 minutes of drying time between each coat until the scratch is filled.
Blend & Protect (Highly Recommended):
For Gloss finishes, once fully cured, use a light rubbing compound/polish to gently smooth out the edges for a seamless blend.
For Matte finishes, avoid polishing and apply a dedicated satin/matte clear coat to lock in the color and match the original flat texture perfectly.
Volume: 15 ml (Approx. 0.51 fl oz) Made In Taiwan