News RSS

.........

Two are the same way to install the spring.Small screws must be locked and then closedIf not, the air rod may be damaged..Pressure can lead to damaged basesBe sure to follow the instructions here.After the installation is successful, there will be a strong bouncing cushion.

Yes ..OVERTAKE hear the voice of TMAX rider. "Original Backrest feeling never existed" So they research making this type of adjustment bracket. And let it can adjust the angle to adapt to all body types .. Let you really feel the presence of TMAX backrest. OK..Let us open the box.You will see four bags. A:Special fixing tools B and C:Left + right bracket D:Screw kit .We put this kits divided to three components illustrate. Up base: link to backrest. bracket: Link on the up base and down base Down base: Link u backrest plate  Of course .. Please remove backrest before installing  And then loaded down...

Many customers have problems in installation.So we share the installation .OK..we open box start..  Here is the installation instructions on the box You can already see that this kit contains the following.  Front sprocket already assembled in factory (part:6.7.8.9) Please remove the original final drive agencyComprising OEM front and rear sprocket and belt driveThan following will start OVERTAKE installation method The sprocket into the original Peilin(Excessive force to may cause damage to Perlin. Please be careful) Please use soft hammer.Gently knock front sprocket.Remember apply some waterproof grease..will be easy. Front sprocket must be parallel with Peilin Next, put the chain on front sprocket.Start the...